Brakes/Levers/Pads

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Riding an e-bike may give your legs a break but that doesn’t mean your brakes get a break! Specially formulated Serfas E-Bike brake pads utilize strategically formulated compounds engineered to endure the frequent heavy loads and high speed stresses of e-bike riding. Wherever you may be going, make sure you can stop when you get there and ride with a set of Serfas E-Bike brake pads. - Kevlar Composite Compound - E-Bike Compound – Specially Formulated For High Speed & Heavy Load Applications - Compatible With Shimano Deore Mechanical BR-M515 - Hardware Included

• Grooved heat-dissipating back plate design • Durable organic pad compound • Quiet and powerful braking performance for all weather conditions

• Durable organic pad compound • Quiet and powerful braking performance for all weather conditions

Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.

Slide in Serfas' BPS100 Shimano Compatible Road Pads for reliable braking. These cartridge style brake pads install easily and all hardware is included.

Serfas' DBPS4 MTB Shimano Compatible Disc Pads offer long-lasting, reliable braking. They're semi-metallic for durability and are compatible with Shimano Deore Mechanical BR-M515 brakes.

Riding an e-bike may give your legs a break but that doesn’t mean your brakes get a break! Specially formulated Serfas E-Bike brake pads utilize strategically formulated compounds engineered to endure the frequent heavy loads and high speed stresses of e-bike riding. Wherever you may be going, make sure you can stop when you get there and ride with a set of Serfas E-Bike brake pads. - Kevlar Composite Compound - E-Bike Compound – Specially Formulated For High Speed & Heavy Load Applications - Compatible With Shimano XTR For 2011 And Newer - Hardware Included

Make sure you have plenty of stopping power and ride with a set of Serfas high-quality long-lasting disc brake pads. - Semi-Metallic Disc Brake Pads - Hardware Included - Compatible w/ Shimano Ultegra BR-RS805/505

Shimano M03 Metal Disc Brake Pads - OEM pad for XT BR-M755 caliper - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability

- cold forged aluminum sidepull brake with quick release - Standard pull rear, reverse pull front - Pads included

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

This Shimano Alivio BL-T4000 V-Brake Lever Set is compatible with all long-pull brakes, including linear-pull brakes and mountain-style mechanical disc brakes. - Compatible with V-brakes and MTB mechanical disc brakes - Adjustable reach - Brake Lever Use: Pair - Cable Head: Mountain - Brake Lever Actuation: Long Pull

Shimano's disc rotors provide a sturdy and reliable braking surface to slow you down. The design is optimized to clear mud and dirt from the system for all-conditions braking. Continuously cooling itself, this rotor helps keep brake power consistent and improves pad life.

Pro Extreme Sintered pads feature an aggressive compound that provides maximum stopping power making it perfect for DH riding. The dense, sintered compound also resists water making it extremely effective in wet conditions.

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Shimano Altus BR-CT91 cantilever brakes offer confident and reliable braking at a convenient price point. - Brake Lever Actuation: Short Pull - Brake Mount Type: Canti Studs - Material: Aluminum - Pad Attachment Style: Threaded Post - Weight: 204g

- Pair of L-Type brake pads with fins, for one caliper - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

Cost effective stopping power from the leader in cable-actuated disc brakes. - For use with short cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 215 g

- The Storm HC rotor is designed for extreme use and unparalleled braking performance under high braking forces.

Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: Shimano: - Dura Ace BR-R9170 - Ultegra BR-R8070 - BR-RS805 - BR-RS505 - BR-RS405 - BR-RS305

• 2-finger aluminum lever blade with aluminum master cylinder • I-spec II shifter compatible brake lever with narrow, hinged clamp band for increased bar space • Adjustable reach and free-stroke • Servo wave mechanism provides greater braking power with less effort • Brake caliper, hydraulic line, hydraulic fittings, and mineral oil all sold separately

Shimano's Deore XT Ice-Tech rotors utilize the industry standard 6-bolt mounting system for secure mounting. These rotors use an aluminum core with steel outer plates to better control the temperature of the braking surface. This means quieter braking and, more importantly, less fade on long downhills and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.

Shimano BR-RS785 Hydraulic Road Disc Brake Calipers - Brake Caliper Type: Post Mount - Brake Lever Actuation: Hydraulic - Rotor Included: No - Hydraulic Fluid Type: Mineral Oil - Pad Compound: Resin - Weight: 135 g

Shimano's Ultegra Brake Calipers feature lightweight, stiff, cold-forged aluminum arms and a symmetrical dual-pivot design with twin bearings for smooth, easy operation with modulation and power to spare. Direct Mount design integrates the brakes with the frame for improved aerodynamics and increased braking power. Pair them with Shimano's Ultegra polymer-coated brake cable and scrubbing speed feels almost effortless. Setup is fast and simple with cartridge brake pads equipped with conical washers.

Shimano Ultegra R8070 flat mount hydraulic disc brake caliper. - Model Number: BR-R8070 - Brake Type: Hydraulic disc brake - Average Weight: 280 g/pair - Greater rider control in all conditions - Hydraulic disc brake provides the next stage of control - Sleek integration into a road bike's aero profile - Designed to integrate seamlessly with a road bike's profile - Flat mount hydraulic type - Better heat dispersion than current road disc systems (SM-RT800) - New construction provides better heat management than current ICE TECHNOLOGIES FREEZA

XTR RT-MT900 rotors offer stable and versatile braking performance in the most demanding MTB conditions. - Center Lock design (alloy lockring included) - Incorporates Ice Technologies Freeza construction for superior heat dissipation - Compatible with both metal and resin brake pads

The Ultegra BR-R8170 disc brake caliper brings a new level of control to the road cycling world with enhanced modulation and a quicker initial braking point. Despite its smaller construction, the system is quiet and easy to maintain. - Wider pad clearance decreases brake noise - Maintenance-friendly bleeding process

Shimano's flagship disc brake rotor. Quieter than ever, but with superb, consistent braking performance on any long, steep descents thanks to excellent heat dissipation. - The new arm shape is more robust, leading to quieter operation. - Featuring ICE TECHNOLOGIES and FREEZA; ICE TECHNOLOGIES is a proprietary fabrication technique consisting of a 3-layer aluminum and stainless-steel structure allowing for superior cooling. FREEZA are aluminum/stainless fins that support rapid heat dissipation. Combined you get longer pad life, less brake fade and substantially quieter braking. - The inner aluminum surface of the FREEZA fins is covered with heat-dissipating paint. Providing even more colling performance to reduce brake fade. - Recommended both for road or mountain bike braking systems. - Lock-ring included. - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Stainless steel/Aluminum - Disc Technology: Ice-Tech and Freeza - Weight: 114g